Sidebar
jaypikayprojects:anycubic_i3_mega:cura_settings
| Cura Settings | |||
|---|---|---|---|
| Option | Value | Unit | Description |
| Quality | |||
| Layer Height | 0.2 | mm | |
| Shell | |||
| Infill | |||
| Infill Density | 25 | % | |
| Material | |||
| Printing Temperature | 230 | °C | PETG |
| Build Plate Temperature | 85 | °C | |
| Enable Retraction | true | ||
| Retract at Layer Change | true | ||
| Retraction Distance | 7 | mm | Test: 1,3mm |
| Retraction Speed | 70 | mm/s | Test: 70 mm/s |
| Speed | |||
| Print Speed | 60 | mm/s | Details ⇒ Slower |
| Infill Speed | 50 | mm/s | |
| Wall Speed | 30 | mm/s | |
| Outer Wall Speed | 30 | mm/s | |
| Inner Wall Speed | 60 | mm/s | |
| Travel Speed | 80 | mm/s | Faster/Slower? D:150 |
| Initial Layer Speed | 20 | mm/s | More holes ⇒ Slower |
| Travel | |||
| Combing Mode | Not in Skin | ||
| Retract Before Outer Wall | true | ||
| Avoid Printed Parts When Travel | true | ||
| Avoid Supports When Traveling | true | ||
| Z Hop When Retracted | true | ||
| Z Hop Height | 0.075 | mm | |
| Cooling | |||
| Enable Print Cooling | true | ||
| Fan Speed | 100 | % | 100 PLA |
| Initial Fan Speed | 0 | % | |
| Regular Fan Speed at Layer | 3 | ||
| Support | |||
| Generate Support | false | ||
| Support Placement | Touching Build | ||
| Support Overhang Angle | 60 | ° | |
| Build Plate Adhesion | |||
| Build Plate Adhesion Type | Skirt | ||
| Experimental | |||
| Tree Support | true | ||
| Tree Support Branch Angle | 40 | ° | |
| Tree Support Branch Distance | 1 | mm | |
projects/anycubic_i3_mega/cura_settings.txt · Last modified: 2019/03/21 12:30 by jpk
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
